|
|
RFID Guard Tour System WM-5000V |
|
|
|
|
| Product Description |
WM-5000V+ is our new RFID guard patrol system. It is metal body and molded rubber shell, can auto-read signal cards without key press and no need any download station when upload patrol data to PC. What we need is just a USB port cable. The biggest benefit is that there is no any keys on furface, which makes it total water-proof, and super unti-strike!
WM-5000V+ works with the popular EM format signal cards, which are low in cost and have been widely used in systems including work-attendance checking, access control, fee collection, parking management, etc. The readers have been used in guard tour systems as well as other applications including time and attendance, vehicle management, animal identification, parts management, etc. |
| FEATURES |
Alloy body, molded rubbler shell, super durability
Auto induction card-reading
Completely water resistant
Sabotage absorbent, easy maintenance
Read EMID signal card
USB communication, no need downloader station
Super storage capacity 4Mb Flash, 60000 records
Reading distance≤10cm
Easy carrying, brilliant exterior design
Real time internal clock
Resistant to electrical shock
Long battery life |
|
| TECHNICAL SPECIFICATIONS |
- Physical:Metal Body, Molded rubber shell
- Dimensions:130mmx40mmx28mm
- Working Frequency: 125KHz
- Operating Temperature:-50°to 186°F (-45°to +85°C)
- Humidity: 10% to 98% non-condensing
- Memory: 4Mb Flash ROM
- Storage Capacity:60000 pieces records
- Battery:3.0 V Lithium Battery, 1200mAh
- Signal Card Detection:Auto induction card-reading
- Card Reading Distance:3cm-5cm
- Communication:USB port, no need downloader station
- Weight:196g
|
|
EM Signal Card
EMID signal cards are constructed to withstand intentional sabotages, which can be read from long distances(0-12cm) and operated in wide temperature ranges. They are also completely waterproof, and can be sealed inside non-metalic material walls; Button, circle, keyring, nail and cylinder-shaped cards used as guard tour checkpoints. These can be installed either on or beneath wall surfaces; Key chain-attachable type personnel / incident card used to identify patrol personnel or events and incidents. Its working frequency is 125KHz. |
| |
| EM Signal Card Technical Specifications |
- Physical:Water-resistant ant, ASB plastic case
- Shape:Nail, button, circle, keyring and cylinder shape, etc.
- Weight:About 2 g
- Operating Temperature:-20 C to +50 C
- Working Frequency: 125KHz
- Battery:None
- Data Storage:Unique 64-bit serial number (read-only)
|
 |
This cable can be used to connect between the reader and PC, which is according with DY/T1019, IEC61156, ANSI/EIA/TIA-568 standard. |
| Quick Start Guide |
| |
1. The patrolling guard takes the reader and read his own Guard ID to identify himself with the system
2. Then the guards go to the checkpoints, the Reader will automatically read each EM signal card and no need touch it. When reading successfully, a flash of the red indicator light accompanied by a "beep" means that a reading has been made. The WM-5000V+ will store the signal card's ID number and time for every station reading.
3. After patrolling are done, use the USB port cable to connect the computer and the Reader directly and have a data analysis and management.. |
APPLICATIONS
Security Guard patrolling, Building Guard Patrolling,Community Guard Patrolling,
Time Attendance Monitoring, Policeman Patrolling, Military Patrolling, Nurses Daily Round Monitoring.
|
| |
|
